Pen Display OEM Programs
OEM pen display programs at Huion are built on the same engineering that ships the Kamvas and Kamvas Pro lines to end users worldwide: PenTech 4.0 pen technology, up to 16384 levels of pressure sensitivity, 4K-class displays with full lamination, and a self-developed chip lineage that began with the HV400 and now runs the fourth-generation HV800. An OEM partner does not start from a blank schematic — it starts from mass-produced, field-proven display hardware and discusses the customization scope for its deployment with the factory team.
The Kamvas Engineering Behind OEM Programs
Consumer-proven hardware, factory-backed customization
The Kamvas line is the proof behind the OEM offer. Kamvas Pro models ship with 16384 levels of pressure sensitivity, PenTech 4.0 pens such as the PW600/PW600S, and 4K UHD panels with 1.07 billion display colors and full lamination — the Kamvas Pro 19 and Kamvas Pro 27 are documented at 3840 x 2160 resolution, quantum-dot-class color gamuts up to 99% sRGB / 98% Adobe RGB / 97% DCI-P3, and tilt support to ±60°. The mainstream Kamvas models, built on PenTech 3.0, deliver 8192 levels of pressure sensitivity with 266PPS report rates, 120% sRGB gamuts, full lamination, and anti-glare etched glass, as documented on the Kamvas 13 and Kamvas 16 (2021) pages. Pen resolution runs at 5080 LPI across the range, with accuracy figures documented at ±0.5mm center on the display models.
That specification stack exists because Huion is a digital-ink-device manufacturer first: the company designs the pen sensor, writes the pressure algorithm, and develops its own recognition chips. The HV400 was the first mass-produced chip for graphic input recognition; the current fourth-generation HV800 carries the company's own IP. An OEM pen display inherits this full stack. When a buyer asks for a pen display tuned for a specific industry — a large-format review station, an interactive front desk, a classroom display — the factory is modifying its own designs, not relaying requests to a third-party ODM.
Where Pen Display OEM Fits
Deployment scenarios that use Kamvas-class hardware
Industry Review Stations
Large-format Kamvas Pro hardware (19- and 27-inch class, 4K, 16384 pressure levels) suits design review, plan markup, and quality-inspection stations where pen-on-screen precision is the workflow. OEM discussion covers branding, firmware, and any deployment-specific housing needs.
Education Displays
The B2B catalog includes Kamvas Hub interactive displays and classroom Kamvas models (13, 16, 22 Plus, Studio 16) with PenTech 3.0 to 3.0+ pens, 8192-level pressure, and full lamination. Schools and ed-tech integrators source through project arrangements — see wholesale and drawing tablet wholesale for the channel path.
Signature & Service Desks
The DS signing series overlaps the pen display category at 10.1- and 15.6-inch sizes, purpose-built for counters. Where a deployment needs a larger signing or annotation surface, Kamvas-class hardware is the OEM base. The OEM/ODM overview describes the full signing lineup.
What the Factory Brings to a Pen Display Program
The four technical pillars
Pen technology. PenTech 4.0 on the flagship Kamvas Pro models and PenTech 3.0/3.0+ across the mainstream line. Battery-free EMR pens — no charging, no battery replacement — which matters enormously in shared-use deployments where dozens of users touch the same pen daily.
Display quality. Full lamination on the documented models, anti-glare etched glass, 4K UHD on the Kamvas Pro 19 and 27, and color gamuts reaching 140% sRGB (quantum dot) on the Kamvas Pro 24 (4K) and Kamvas 22 Plus. For OEM programs, the panel specification is the display specification of the mass-produced base model unless the project defines otherwise.
Pen precision. 5080 LPI pen resolution, documented sensing heights of 10mm, and center accuracies of ±0.5mm on the display models, with report rates of 266PPS and above. These are the numbers the factory publishes for its own retail products, and they are the numbers an OEM base inherits.
Chip and firmware. The HV400-to-HV800 self-developed chip lineage means pressure algorithms and pen-firmware behavior are factory-owned and factory-tunable. SDK integration for counter software, teaching platforms, or review tools is part of the B2B program's software development capability.
Scoping a Pen Display OEM Project
How the conversation starts
A productive first inquiry to [email protected] names the base model family (Kamvas Pro flagship class, mainstream Kamvas, or the B2B DS/Kamvas Hub lines), the deployment environment and operating system, and the customization dimensions to be confirmed — branding, firmware or SDK integration, housing and packaging. The factory responds with a program scoped to the model and order scope; minimum quantities and lead times are confirmed in that discussion, not published as generic numbers, because a 13-inch classroom display program and a 27-inch 4K review-station program are fundamentally different engineering efforts.
Buyers who want finished devices in volume without a customization program should look at the wholesale channel page instead. Those evaluating the tablet side of the lineup — screenless pen tablets for education fleets and enterprise rollouts — will find the parallel story on the drawing tablet OEM page. The company background behind all of it is summarized on the manufacturer page.
Can Huion OEM pen displays for my brand?
Yes. Pen display OEM programs are built on the Kamvas and Kamvas Pro hardware base, and branding is one of the customization dimensions confirmed per project. Contact [email protected] with your target model family and deployment details to scope the program.
What pen technology do OEM pen displays use?
The flagship Kamvas Pro base uses PenTech 4.0 with 16384 pressure levels; mainstream Kamvas models use PenTech 3.0/3.0+ with 8192 levels. All are battery-free EMR with 5080 LPI pen resolution. The specific base defines the pen specification of your program.
Is SDK integration available for OEM displays?
Yes — the B2B program includes software development capability with a customizable SDK, so the display can be integrated with your counter, classroom, or review software. Scope is defined per project with the OEM team.
What are the MOQ and lead time for pen display OEM?
Not published online; confirmed per model and order scope during the inquiry. A classroom display program and a 4K review-station program have different engineering requirements, so the factory quotes each program on its actual scope.
What certificates can OEM pen displays carry?
Certificates are available upon request. Tell the OEM team which markets the program will ship to so the right certification documentation can be prepared.